Yamaha CDR-HD1300 Car Stereo System User Manual


 
E-61
English
COPYING AND RECORDING ONTO A CD-R OR CD-RW DISC
4. Press COPY twice.
The following message appears on the display, and this unit
enters in the copy standby mode. Copying has not been started
yet at this stage.
5. Select the group on the HDD to be copied.
Rotate the MULTI JOG knob (press +/ on the remote control)
to select the group on the HDD to be copied.
When a disc is selected:
When an album is selected:
When a bookmark is selected:
HDD CD-RW
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
003 1 1 000
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
003 1 1 000
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
003 1 1 000
ALBM
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
Mrk 1 1 000
MARK
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
6. Start copying.
Press w/d (w on the remote control) to start copying.
Notes
OPC may start on the loaded CD-R or CD-RW disc
depending on its recording condition. It takes approximately
15 seconds to complete the adjustment.
When the adjustment has been completed, and the message
above turns off on the display, copying automatically starts.
The progress of elapsed time for the track being copied may
vary by the data processing inside this unit.
To cancel copying, press a.
Caution
If copying is canceled by a being pressed, only the data that
has been recorded on the CD-R or CD-RW disc before the
cancellation remains on the disc. When Digital Move (see
page 65) is selected, the original data on the HDD which has
already been copied to a CD-R or CD-RW disc will be
deleted.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
7. Press FINALIZE to start finalization.
See page 70 for finalization.
Text data
If the copied data contains text data that can be copied such as a
disc title, the TOC indicator flashes when copying is completed.
If you attempt to open the disc tray by pressing v (OPEN/
CLOSE on the remote control), TEXT Save ? appears on the
display.
In order to copy the text data, perform finalization procedure.
In order to open the disc tray without copying the text data,
press v (OPEN/CLOSE on the remote control) again.
However once the disc tray is opened, text data cannot be
copied.
003 1 1 001
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
OPC Adjust
REC
GROUP
CDR
L
R
dB 30 10 6 20
ALL SYNC ANLG
COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC
107_HD1300(E)60-71 02.6.24, 6:51 PM61