Yamaha CDR-HD1300 Car Stereo System User Manual


 
E-28
Manual track marking
RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD
ER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL
INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
TRACK NO./BOOKMARK
OPEN/CLOSE
COPY REC
TEXT/TIME
TRACK NO.
WRITE
MODE MENU
CLEAR
1
ABC
2
DEF
3
GHI
ENTER
COMPLETE
A.M.Q.R.
FINALIZE
INPUT
TIMER REC
ERASE
TRACK NO.
WRITE
This unit can automatically place track markers. However you can
also manually place track markers during your recording. (Manual
track marking)
Press TRACK NO./BOOKMARK (TRACK NO. WRITE on the
remote control) during your recording.
A new track number is added at the location on the disc corre-
sponding to the time TRACK NO./BOOKMARK (TRACK NO.
WRITE on the remote control) is pressed.
Manual track marking is possible after the recording has been
performed for 5 seconds from the beginning of the track, and a
disc cannot contain more than 99 tracks. Even if there is time
remaining on the disc, further recording is impossible once 99
track markers have been placed.
Notes
The track markers may not be placed properly even if the
recording has been performed in the synchronized recording
according to the type of the source devices. To avoid this problem,
place the track markers manually.
Manual track marking is possible even during synchronized
recording.
You can place the track markers to the tracks that have been
recorded on the HDD by dividing the track. See Track Divide
on page 46.
103_HD1300(E)14-28 02.6.24, 6:51 PM28