Filter
Top Products
E-47
English
EDITING
TRACK EDITING
3. Press COMPLETE.
The track being played is divided into two at the set dividing
point.
Playback resumes from the beginning of the second track of the
two divided tracks.
Cautions
• The minimum length of a track is 4 seconds. It is not possible to
create a track that is shorter than 4 seconds by dividing a track.
• One disc can contain up to 99 tracks. If the disc already contains
99 tracks, “Track No.Full” appears on the display.
Note
• The track numbers following the divided track will be up-
numbered by one. However, if there is any unused track number,
only the tracks up to that number will be up-numbered.
12 456
123456
1346
123456
Before “Track Divide” is performed
Divided into two
After “Track Divide” has been performed (dividing a track into
two)
: Space not being used
Track Pack
You can re-organize the track numbers by eliminating unused track
numbers, that have been created by changing track numbers or
erasing tracks.
1. Select and confirm “Track Pack” in step 5 of “Editing
during the stop mode” on page 39.
The following message appears on the display.
2. Select the disc on which unused track numbers are
to be eliminated by rotating the MULTI JOG knob
(pressing +/– on the remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc on which unused track
numbers are to be eliminated.
Press CLEAR to cancel the confirmed selection.
4. Press COMPLETE.
The track numbers are re-organized by eliminating unused
track numbers.
This unit returns to the editing menu item selection.
Pack 001 ?
L
R
dB –30 –10 –6 –20
Disc on which unused track
numbers are to be eliminated
Before “Track Pack” is performed
After “Track Pack” has been performed (Unused track numbers
have been eliminated.)
: Unused track numbers
105_HD1300(E)39-51 02.6.24, 6:51 PM47