Filter
Top Products
E-91
English
APPENDIX
Reading
This unit reads the format of the CD, CD-R, or CD-RW disc loaded
on the disc tray. Approximately 15 seconds may be required to
complete this automatic adjustment. However, this time length may
change according to the type of the CD, CD-R, or CD-RW disc that
has been loaded.
Slow Fnlz OK?
This message confirms starting the slow finalization of a CD-R or
CD-RW disc. If you wish to finalize, press w/d (w on the remote
control).
Standby
This message is displayed for several seconds after REC has been
pressed to record on a CD-R or CD-RW disc.
TEXT Save?
This message is displayed when the disc tray has been attempted to
be opened without performing finalization after copying the data
including the titles (disc title, track title, and album title) to a CD-R
or CD-RW disc.
Timer Standby
This message is displayed after the timer recording setting has been
completed, or displayed for approximate 5 seconds before the timer
recording starts.
Track No.Full
One disc can contain up to 99 tracks. Recording is attempted on the
disc that has reached the maximum number.
Unavailable
The CD-R disc whose recordable time is other than 74 minutes or
79 minutes or the CD-R disc which does not support 4x writing, or
the CD-RW disc has been loaded when copying in the Audio
Master Quality Recording mode.
Unrecordable
In recording or copying onto a CD-R or CD-RW disc, the disc
cannot be used for recording or copying. Or in recording or copying
onto the HDD, no space is available.
Wait
This message flashes while this unit is writing information to the
PMA (program Memory Area) after a is pressed in recording onto
a CD-R or CD-RW disc, or flashes while processing the data on the
HDD or detecting the loaded HDD when this unit is turned on.
DISPLAY MESSAGES
110_HD1300(E)84-94 02.6.24, 6:52 PM91