Yamaha CDR-HD1300 Car Stereo System User Manual


 
E-42
TRACK EDITING
3. Press COMPLETE.
The new track beginning point is set.
Playback resumes from the beginning of the adjusted track.
Notes
If the adjusted track includes a part that cannot be copied digitally
before adjusting, the adjusted track itself cannot be copied
digitally either.
When the emphasis status of the track to be adjusted is different
from that of the previous track, the emphasis status of the track to
be adjusted takes precedence over that of the previous track.
Track Erase
You can erase a selected track.
Editing during the stop mode
1. Select and confirm Track Erase in step 5 of Editing
during the stop mode on page 39.
The following message appears on the display.
The disc number that contains the track to be erased flashes.
2. Select the disc that contains the track to be erased
by rotating the MULTI JOG knob (pressing +/ on the
remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
be erased.
The number of the track to be erased flashes.
Press CLEAR to cancel the confirmed selection.
4. Select the track to be erased by rotating the MULTI
JOG knob (pressing +/ on the remote control).
Before Track Adjust is performed
After Track Adjust has been performed (The beginning
of track 2 is adjusted earlier.)
12
12
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to be erased.
Press CLEAR to cancel the confirmed selection.
To check the track to be erased, press w/d (w on the remote
control). This unit starts to play the track to be erased
repeatedly.
6. Press COMPLETE.
The selected track is erased.
This unit returns to the editing menu item selection.
Editing during playback
1. Select and confirm Track Erase in step 2 of Editing
during playback on page 39.
The track being played is confirmed to be erased.
2. Press COMPLETE.
The track being played is erased.
Playback resumes from the beginning of the next track after the
erased track. If no track follows the erased track, this unit plays
the previous track of the erased track.
Note
The number of the track that has been erased will be available for
future use.
Erase 001 1?
GROUP
L
R
dB 30 10 6 20
Track to be erased
Disc that contains the track to be erased
105_HD1300(E)39-51 02.6.24, 6:51 PM42