Filter
Top Products
E-55
English
EDITING
DISC EDITING
■ Editing during playback
1. Select and confirm “Disc Combine” in step 2 of
“Editing during playback” on page 52.
The disc being played is confirmed to be the first disc in the
combination.
The number of the disc being played and the number of the
disc to be the last in the combination appear on the display.
2. Select the disc to be the last in the combination by
rotating the MULTI JOG knob (pressing +/– on the
remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be the last in the
combination.
Press CLEAR to cancel the confirmed selection.
4. Press COMPLETE.
The two selected discs and all those between are combined into
one disc.
Playback resumes from the beginning of the combined disc.
Cautions
• One disc can contain up to 99 tracks. When the total track number
on a disc exceeds 99, “Track No.Full” appears on the display.
• The maximum length of one disc on the HDD is 99 minutes 59
seconds. When the total time of the discs to be combined exceeds
99 minutes 59 seconds, “No Enough Spc” appears on the display.
Notes
• When combining a series of discs, the selected disc numbers
following the selected first disc will be available for future use.
• The disc title for the first disc is effective for the combined disc.
Disc being played
001 - 002
GROUP
L
R
dB –30 –10 –6 –20
G
Disc to be the last in the
combination
Disc Divide
You can divide a disc into two at the selected point.
■ Editing during the stop mode
1. Select and confirm “Disc Divide” in step 5 of “Editing
during the stop mode” on page 52.
The following message appears on the display.
The number of the disc to be divided flashes.
2. Select the disc to be divided by rotating the MULTI
JOG knob (pressing +/– on the remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc to be divided.
“Div.from” and the dividing point (the number of the track to
be the first after dividing) appear on the display.
Press CLEAR to cancel the confirmed selection.
4. Select the dividing point by rotating the MULTI JOG
knob (pressing +/– on the remote control).
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the dividing point.
Press CLEAR to cancel the confirmed selection.
6. Press COMPLETE.
The selected disc is divided into two at the selected dividing
point.
This unit returns to the editing menu item selection.
Continues to next page
Divide 001?
GROUP
L
R
dB –30 –10 –6 –20
Disc to be divided
Track to be the first after dividing
Div. from 4?
TRACK
L
R
dB –30 –10 –6 –20
106_HD1300(E)52-59 02.6.24, 6:51 PM55