Filter
Top Products
E-49
English
EDITING
TRACK EDITING
3. Press COMPLETE.
The fade-in is added to the beginning of the track being played
for the selected length.
Playback resumes from the beginning of the track the fade-in
has been added to.
Notes
• Fade-in cannot be added to a track that is shorter than 21 seconds.
• The fade-in effect becomes ineffective if the following editing is
performed to the track which the fade-in is added to.
– Erasing a certain part of the track (Part Erase).
– Combining the track (Track Combine).
– Dividing the track (Track Divide).
– Adjusting the beginning of the track (Track Adjust).
• If “Track Adjust” has been performed, the fade-in effect of both
the adjusted track and the previous track becomes ineffective.
Add Fade Out
You can add fade-out at the end of a track. The end of the track is
played with gradually lowering the level when fade-out has been
added.
■ Editing during the stop mode
1. Select and confirm “Add Fade Out” in step 5 of
“Editing during the stop mode” on page 39.
The following message appears on the display.
The disc number that contains the track to add fade-out flashes.
2. Select the disc that contains the track to add fade-out
by rotating the MULTI JOG knob (pressing +/– on the
remote control).
3. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc that contains the track to
add fade-out.
The number of the track to add fade-out flashes.
Press CLEAR to cancel the confirmed selection.
4. Select the track to add fade-out by rotating the MULTI
JOG knob (pressing +/– on the remote control).
5. Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track to add fade-out.
The ending of the track for 8 seconds is repeatedly played with
a 3-second (initial setting) fade-out.
The following message appears on the display.
6. Rotate MULTI JOG knob (+/– on the remote control)
to set the fade-out length.
The fade-out length can be set in the 1 to 10 second range by 1-
second steps.
If you stop rotating the MULTI JOG knob, this unit starts
repeated playback of the ending of the track with a fade-out of
the length set in above step, with extra portion for further 5
seconds.
Press CLEAR to cancel the setting.
7. Press COMPLETE.
The fade-out is added to the end of the selected track for the
selected length.
This unit returns to the editing menu item selection.
Continues to next page
F.Out: 3 1001
TIME
L
R
dB –30 –10 –6 –20
Fade-out length
Playing time of the track
Disc that contains the track to add fade-out
Track to add fade-out
Fd.Out 001 1?
GROUP
L
R
dB –30 –10 –6 –20
105_HD1300(E)39-51 02.6.24, 6:51 PM49