A SERVICE OF

logo

Open as PDF
next previous
Hydraulic
System
Reelmaster 6500-D/6700-D Hydraulic SystemPage 4 - 81
Rear (6700 -D #6 or 7 Only)
A. Remove both lock nuts and upper link plate. Re-
moveupperlinkandrollers fromtheliftarmandcylin-
der clevis (Fig. 52).
B. Remove retaining ring from the cylinder cap end
pin. Remove cylinder pin with remaining retaining
ring from the frame and cylinder clevis (Fig. 52).
C. Install in reverse order. Use a drop of medium
strength thread locking compound tosecure the lock
nuts.
1. Lock Nut
2. Upper Link Plate
3. Upper Link
4. Roller
5. Retaining Ring
6. Cylinder Cap End Pin
7. Lift Arm
8. Lower Link Plate
Figure 52
4
6
5
1
2
3
8
7
8