Filter
Top Products
Symbol definitions
]
= CR/LF (carriage return/line feed)
}
or ¦
=
Carriage return (no line feed, hex 0D)
• = Space
*
= Asterisk character (which is a command
character, not a variable)
E
or W
= Escape
X!
= Port number (two digits, zero padding)
X%
= DHCP mode (0=off, 1=on)
X1!
= Firmware version number
X1@
= Device name (63 characters, max)
Must comply with internet host name
standards. See RFC1123.
X1#
= Day, date, and time (Day, DDMmmYYYY
HH:MM:SS)
X1$
= IP address in dotted decimal notation
(xxx.xxx.xxx.xxx)
Default: 192.168.254.254 no padding
X1%
= Gateway address
Default: 0.0.0.0 no padding
X1*
= Hardware MAC address
(00‑05‑A6‑NN‑NN‑NN)
X1(
= Subnet mask
default: 255.255.255.0 no padding)
X2@
= Verbose mode
0=off/none (default for telnet connections
1=verbose mode (default for RS-232 host
control)
2=tagged responses for queries
3=verbose mode and tagged responses
X2%
= RS-232 baud rate (300 to 115200 bps,
default: 9600)
X2^
= RS-232 parity (default: none)
X2&
= RS-232 data bits (default: 8)
X2*
= RS-232 stop bits (default: 1)
X3#
= Password: maximum length 12
characters. All alpha-numeric characters
permitted except /,\,|,"space", and "*".
X3^
= HDMI output format:
0=Auto (based on EDID), default
1=DVI
2=HDMI 444 RGB
(0-255, audio, InfoFrames)
3=unused
4=HDMI 444 YUV "Limited"
(16-235, audio, InfoFrames)
5=unused
6=HDMI 422 YUV "Limited"
(16-235, audio, InfoFrames)
X5)
= RS-232 direct access mode
(0=disabled, 1=host control, 2=direct
access:pass-through)
X5@
= Security level:
11=network user
12=admin user
X6(
= Port timeout in seconds (zero padded,
example 00050)
X50!
= Input number
1 or 2 digit command,
2 digit response (00=all)
X51)
= 0=Off/disable, 1=On/enable)
X51@
= Internal temperature
(in degrees Celsius; xx.x)
X52!
= Video Output Rate
10 = 640x480 @ 50 Hz
11 = 640x480 @ 60 Hz
12 = 800x600 @ 50 Hz
13 = 800x600 @ 60 Hz
14 = 1024x768 @ 50 Hz
15 = 1024x768 @ 60 Hz
16 = 1280x1024 @ 50 Hz
17 = 1280x1024 @ 60 Hz
18 = 1366x768 @ 50 Hz
19 = 1366x768 @ 60 Hz
20 = 1600x1200 @ 50 Hz
21 = 1600x1200 @ 60 Hz
22 = 1920x1200 @ 50 Hz
23 = 1920x1200 @ 60 Hz
24 = 480p @ 59.94 Hz
25 = 480p @ 60 Hz
26 = 576p @ 50 Hz
32 = 720p @ 50 Hz
33 = 720p @ 59.94 Hz
34 = 720p @ 60 Hz (default)
35 = 1080i @ 50 Hz
36 = 1080i @ 59.94 Hz
37 = 1080i @ 60 Hz
38 = 1080p @ 23.98 Hz
39 = 1080p @ 24 Hz
40 = 1080p @ 25 Hz
41 = 1080p @ 29.97 Hz
42 = 1080p @ 30 Hz
43 = 1080p @ 50 Hz
44 = 1080p @ 59.94 Hz
45 = 1080p @ 60 Hz
X52@
= Test Pattern
(two-digit response, 0 padding)
64SMD101 • Remote Communication and Control