Filter
Top Products
Extron USB Device
ÖÖ
ÝÝ
4
4
ÕÕ
Ü
Ü
4
4
DataViewer
DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232,
USB, and TCP/IP communication with Extron devices. The software allows users to send
commands to a device and view the responses in ASCII or hexadecimal format. Command
and response logs can be saved in text or HTML format.
DataViewer is available at www.extron.com. Download the installation file and load the
program on the PC connected to the SMD101.
Starting the DataViewer program
1. To run the DataViewer Control Program, click
the desktop icon.
2. The communications setup dialog box opens.
a. Select the Comm Port (RS-232) tab (shown
with the correct protocol settings at right) if
using the rear panel RS-232 port, or
b. Select the USB tab if using the front panel
config port.
3. Select the startup options:
a. If RS-232 is selected, configure the protocol
settings, then click OK to always use this port
and settings when starting the DataViewer
program.
b. If USB is selected, choose Extron USB
Device in the drop-down window and click
OK.
To automatically connect to the SMD101,
select Auto‑connect on startup .
4. Click OK to start using the program.
You are now ready to configure DataViewer or begin
entering commands.
Use the DataViewer help file formore information on
the program.
SMD101 • Reference Information 93