Filter
Top Products
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
IP Setup Commands
Set unit name
E X1@
CN
}
Ipn
•
X1@
]
Set the name of the unit.
Set unit name to
factory default
E
•
CN
}
Ipn
•
X1@
]
Sets the name of the unit to the
factory default.
View unit name
E
CN
} X1@
]
View the name of the unit.
Set date / time
E
MM/DD/YY‑
HH:MM:SS CT
}
Ipt
•
X1#
]
Set the date and time.
View date / time
E
CT
} X1#
]
View the date and time.
Set time zone
E
X60(
* TZON
}
Tzon
X60(
*
X61)
]
View time zone
E
TZON
}
Tzon
X60(
*
X61)
]
View all time zones
E
* TZON
}
Tzon
X60(
*
X61)
]
...
Repeats for all time zones.
Set DHCP on
E
1DH
}
Idh1
]
Sets DHCP to on.
Set DHCP off
E
0DH
}
Idh0
]
Sets DHCP to off.
View DHCP mode
E
DH
} X%
]
View the DHCP mode setting.
Set IP address
E X1$
CI
}
Ipi
•
X1$
]
Set the IP address of the unit.
View IP address
E
CI
} X1$
]
View the IP address of the unit.
View hardware MAC
address
E
CH
} X1*
]
In verbose mode:
Iph
•
X1*
]
View the hardware MAC
address of the unit.
Set subnet mask
E X1(
CS
}
Ips
•
X1(
]
Set the subnet mask of the
unit.
View subnet mask
E
CS
} X1(
]
View the subnet mask of the
unit.
Set gateway IP
address
E X1%
CG
}
Ipg
•
X1%
]
Set the gateway IP address.
View gateway IP
address
E
CG
} X1%
]
View the gateway IP address.
NOTES:
X% = DHCP mode 0 = Off, 1 = On
X1@ = Unit/Device/Network Host Name 63 characters, maximum. Must comply with internet host name
standards. See RFC1123.
X1# = Day, date, and time Format: Day, DD Mmm YYYY HH : MM : SS
X1$ = IP address (xxx.xxx.xxx.xxx) Default IP address = 192.168.254.254
X1% = Gateway address Default gateway IP address = 0.0.0.0
X1* = Hardware MAC address 00‑05‑A6‑xx‑xx‑xx
X1( = Subnet mask Default subnet mask = 255.255.0.0
X60( = Time zone location 2-6 letters (typically 3)
X61) = Time zone description Example: (UTC‑08:00) Pacific Time
Command and Response Table for Basic SIS Commands (continued)
71SMD101 • Remote Communication and Control