Filter
Top Products
NDA-24219 CHAPTER 3
Page 115
Revision 2.0
NAP-200-009
Sheet 1/3
Mounting Circuit Cards
1. MOUNTING PROCEDURE
(1) For testing, turn on “SW1” switch on the PZ-PW86/PZ-PW112 card. Make sure that “ON” lamp (green) is
lit. See Figure 009-1.
(2) Turn off “SW1” switch.
Figure 009-1 PZ-PW86/PZ/PW112 Card Lamp Indication
PZ-PW86/PW112
ON
OFF
SW SWITCH
ON LAMP (GREEN)
MN
MJ
ON