Filter
Top Products
NDA-24219 CHAPTER 3
Page 31
Revision 2.0
NAP-200-003
Sheet 2/12
Installation of Main Equipment
(2)Using appropriate fasteners (locally provided; see Table 003-1) for the type of wall constructions, secure
the PIM to the wall. For the wall mounting points, refer to Figure 002-1 in NAP-200-002.
Note: The wall types are listed in recommendation order. Concrete is the most secure. Plaster board is the least secure.
Table 003-1 Recommended Fasteners
WALL TYPE RECOMMENDED FASTENER
Plaster Board
[Thickness Min. 9.6 mm
(0.38 inch)]
Molly Anchor Type
Min. 3.5 mm (0.14 inch) DIA
Max. 4.5 mm (0.17 inch) DIA
Wood Wood Type Screws
Min. 3.5 mm (0.14 inch) DIA
Max. 4.5 mm (0.17 inch) DIA
Concrete Anchor Bolt Type
Recommended 4 mm (0.16 inch) by 25 mm (0.98 inch)