Filter
Top Products
NDA-24219 CHAPTER 3
Page 35
Revision 2.0
NAP-200-003
Sheet 6/12
Installation of Main Equipment
2.19-INCH RACK-MOUNTING INSTALLATION
(1)When the system is two PIM configuration, connect PIMs with three bolts as shown in Figure 003-1.
(2)Before mounting the PIM, connect the TOP COVER, BOTTOM COVER and AC CORD-A-U to the PIM
as shown in Figure 003-3 and Figure 003-4.
(3)Secure the 19” BRACKET (H) to the 19-inch Rack as shown in Figure 003-5
(4)Mount the PIM on the 19” BRACKET (H) as shown in Figure 003-5 .
Then, secure the PIM to the 19” BRACKET (H) as shown in Figure 003-5 .
Figure 003-5 Mounting PIM to 19-Inch Rack
A
B
C
A
B
PIM
19” BRACKET(H)
C
FRONT
19” BRACKET(H)
19-INCH RACK (IEC)
PIM
BOTTOM COVER