Filter
Top Products
CHAPTER 3 NDA-24219
Page 116
Revision 2.0
NAP-200-009
Sheet 2/3
Mounting Circuit Cards
(3) Before mounting the circuit cards, confirm the following items.
• Wrist Strap is connected Frame Ground.
• Switch setting of circuit cards is already completed (Refer to the Circuit Card Manual).
• “SW1” switch of PZ-PW86PZ/PW112 Card is turned off.
(4) Mount circuit cards into their mounting positions according to the “Bay Face Layout” and “Port Assign-
ment Table” given in the System Data Sheet.
Figure 009-2 shows the mounting method of circuit cards.
Figure 009-2 Mounting Circuit Cards
CARD FRONT SIDE
WRIST STRAP
TO FRAME GROUND CONNECTION
(SEE FIGURE 3-1)
CARD CONTACT SIDE