Filter
Top Products
CHAPTER 3 NDA-24219
Page 124
Revision 2.0
NAP-200-010
Sheet 7/7
System Initialization and
System Data Entry
DESCRIPTION DATA
Assign the type of signaling (DTMF) for Outgoing
and Bothway Trunk Routes.
. YY = 01
(1) Trunk Route No. (00 - 63)
(2) 7
Specify the DTMF Sender characteristics to match
the distant office.
. YY = 24 (DTMF Inter Digital Pause)
(1) Trunk Route No. (00 - 63)
. YY = 26 (DTMF Sender Signal Width)
(1) Trunk Route No. (00 - 63)
(2) 0/1 : 64ms/128ms
. YY = 46 (DTMF Sender Release Timing)
(1) Trunk Route No. (00 - 63)
Assign whether “*” or “#” from a DTMF Telephone
is used as Switch Hook Flash while hearing Busy
Tone.
(1) 050 (* is used as Switch Hook Flash)
(2) 0: Available
(1) 052 (# is used as Switch Hook Flash)
(2) 0: Available
CM35
CM08
END
A
0 : 32ms
1 : 64ms
2 : 80ms
3 : 96ms
4 : 160ms
5 : 192ms
6 : 240ms
7 : 128ms
0: 2sec.
1: 4sec.
2: 6sec.
3: 8sec.
4 : 12sec.
5 : 14sec.
6 : 16sec.
7 : 10sec.