Filter
Top Products
CHAPTER 3 NDA-24219
Page 34
Revision 2.0
NAP-200-003
Sheet 5/12
Installation of Main Equipment
(5) Connect the AC CORD-A-U to the AC INPUT connector on the PZ-PW86/PZ-PW112, and its FG cord
to the FG terminal on the chassis.
After connection of AC CORD-A-U to the AC INPUT connector, let the cord out of the PIM through the
cable hole provided with bottom of the PIM.
Figure 003-4 Connecting AC CORD to PIM
PZ-PW86/
PZ-PW112
AC CORD-A-U
FG CORD
AC INPUT
FG TERMINAL
H5 (PROVIDED)FG CORD
CABLE HOLE FOR
AC CORD-A-U