Filter
Top Products
NDA-24219 CHAPTER 3
Page 29
Revision 2.0
NAP-200-002
Sheet 2/2
Marking and Drilling
3. DRILLING
Install anchor bolts as shown in Figure 002-2.
Figure 002-2 Installing Anchor Bolt
(1) DRILL A HOLE IN THE CONCRETE WITH A
DRILL SUITABLE FOR A PLUG BOLT A LITTLE
DEEPER THAN THE PLUG BOLT LENGTH.
(2) INSERT THE ANCHOR BOLT INTO THE HOLE.
(3) PUSH ANCHOR BOLT UNTIL THE BOLT
STAYS PERMANENTLY IN PLACE.
(4) TURN BOLT COUNTERCLOCKWISE AND
REMOVE.
(1) (2) (3) (4)