Filter
Top Products
CHAPTER 3 NDA-24219
Page 126
Revision 2.0
NAP-200-012
Sheet 1/1
Cleaning and Visual Check
1. CLEANING
Clean the following places:
• Inside of the main equipment, especially the bottom of the base.
•On the Top Cover.
• Around the Main Equipment and the MDF.
• Keyboard on the Attendant Console.
2. VISUAL CHECK
(1) Check to see if all circuit cards are in their positions correctly.
(2) Check that the cable connections in the PIM are correctly and completely connected, and the routing of the
cables has been done smoothly and neatly.
(3) Check to see if the MAT is removed.