Filter
Top Products
16
17
On-screen Display
The screen shows the operation status display, the main menu (MAIN MENU) / FUNCTION menu / INPUT SELECT menu displays,
picture adjusting (PICTURE) menu display, audio volume display, sharpness display, FUNCTION display, audio volume bar meter
display, time code (TC) display, closed caption (CC) display, IMD (in monitor display) display and other information.
Operating status display
SDI1 1080/60i 3G:A
P
-
P
FILM
ANALOG
4
1
5
2
6 7 8
3
<Note>
• Use [STATUS DISPLAY] in the [SYSTEM CONFIG] menu to
set the display status.(→page 30)
• Icons meeting the 3 to 8 display requirements appear aligned
to the left.
• [UNSUPPORT SIGNAL] and [NO SIGNAL] may not be prop-
erly displayed.
• For details on the display of names and signal formats of
assist functions in 3D assist mode, refer to “3D Assist Mode”
(→page49).
In 3D assist mode, the various indications (4 to 8) can be
displayed as well.
1. The selected input line (→pages 12 and 20)
• Displays [VIDEO], [SDI1], [SDI2], [HDMI], [DVI-I] ([YP
B
P
R
]/
[RGB-COMP.]/[DVI-VIDEO]/[DVI-COMP.]) and [INT-SG].
2. Signal format
• [UNSUPPORT SIGNAL] appears if an unsupported signal
is input.
It may also indicate that the format selected in the [INPUT
SELECT] menu does not match the input signal.
• [NO SIGNAL] appears when no signal is input.
• The level of a 3G-SDI signal input is displayed to the right of the
signal format.
3. Various indications (PIXEL TO PIXEL mode)
• This indicates that the PIXEL TO PIXEL mode is engaged.
4. Various indications (FILM mode)
• This indicates that [GAMMA SELECT] in [VIDEO CONFIG]
is set to [FILM].
5. Various indications (Lock setting)
• This indicates that the front operations are locked.(→page 48)
6. Various indications (mute indication)
• Indicates that the speaker and headphones are muted.
(→page 21)
7. Various indications (indication of picture adjustment
change)
• Indicates that picture adjustments ([PEAKING]/[PHASE]/
[CHROMA]/[BRIGHT]/[CONTRAST]/[BACKLIGHT]) have
been changed from the values assigned using [SETUP
LOAD] or [POWER ON SETUP].(→page 21)
8. Various indications (ANALOG mode)
• Indicates that the operating mode has been set to analog
audio input using [INPUT SELECT] in the [AUDIO] menu.
Main menu (MAIN MENU)/FUNCTION menu/INPUT SELECT menu displays
1.
Press <MENU> when no menu is displayed.
• The [TOP MENU] appears.
MENUEXIT
[TOP MENU]
MAIN MENU
FUNCTION
INPUT SELECT
2. Turn the rotary knob <PICTURE> to select a menu ([MAIN MENU], [FUNCTION], [INPUT SELECT]) and press the rotary
knob <PICTURE>.
• For details on how to operate menus, refer to “How to Use the On Screen Menu” (→page20).
• In 3D assist and TWO WINDOW mode, the input is fixed to SDI1/SDI2 display and the [INPUT SELECT] menu cannot be se-
lected.
[MAIN MENU] [FUNCTION] [INPUT SELECT]
MENUEXIT
RETURN
RETURNSEL. ENTER
[MAIN MENU]
2D/3D ASSIST
MARKER
VIDEO CONFIG
SYSTEM CONFIG
FUNCTION
GPI
INPUT SELECT
AUDIO
DISPLAY SETUP
CONTROL
HOURS METER
2D
MENUEXIT
RETURN
RETURN
[FUNCTION]
F1:WFM/VECTOR
F2:TWO WINDOW
F3:FOCUS-IN-RED
F4:TIME CODE
F5:LEVEL METER
WFM/VECTOR OFF
MENUEXIT
RETURN
RETURN
[INPUT SELECT]
VIDEO
SDI1
SDI2
HDMI
DVI-I
INT-SG
Displays instructions on <MENU> button operations.