Panasonic BT-LH2170P Car Video System User Manual


 
18
On-screen Display (continued)
19
Audio volume bar meter display
Normal operating mode
11
33
55
77
22
44
66
88
SDI1 1080/60i
Channel display
Reference point
0 dB point
Peak hold
Overrange
In TWO WINDOW mode
11
33
55
77
22
44
66
88
11
33
55
77
22
44
66
88
• A color bar meter indicates the audio level for SDI, HDMI and
AUDIO signals.
• The display method of the audio volume bar meter can be set
in the menu.(→page 45)
• In 3D assist mode, you can monitor the left (L) channel of
SDI1 audio.
• In TWO WINDOW mode, it will display SDI1 and SDI2 in
separate windows.
Display color
Green: Up to reference point (included)
Yellow: Reference point (not included) to 0 dB point (not in-
cluded)
Red: Overrange
Time code (TC) display
( : ) NDF
( . ) DF
LUB
AB
CD
EF
01
LTC 01:02:10:02
• Use the menu to display the time code for HD-SDI signal
input. It also allows you to switch between display modes:
([LTC], [VITC], [LUB], [VUB], [LTC+LUB], [VITC+VUB]).
(→page 46)
In LTC and VITC display mode
• Displays the time code in: hours: minutes: seconds: or frames.
• In drop-frame mode, a different delimiter is used between
seconds and frames.
<Note>
Read errors are displayed as “--:--:--:--”
In LUB and VUB display modes
• BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear in the
stated order.
BG: binary group
• The (:) delimiter does not appear.
<Note>
Read errors are displayed as “-- -- -- --”
In LTC+LUB and VITC+VUB display modes
Each combination is displayed separately.