Filter
Top Products
16 17
On-screen Display (continued)
3. To close a menu, press <MENU>.
• The menu display disappears after approx. 2 minutes of inaction. (The value shown before the display clears is confirmed.)
Picture adjusting (PICTURE) menu display
MENUEXIT
[PICTURE]
SETTING[FACTORY]
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
BACKLIGHT
F-IN-R
0
31
30
30
52
80
15
*
*
A
B
A: File names called by [SETUP LOAD] or [POWER ON
SETUP] appear on the screen to the right of [SETTING].
B: When picture adjustments ([PEAKING]/[PHASE]/[CHRO-
MA]/[BRIGHT]/[CONTRAST]/[BACKLIGHT]) have been
changed from the values assigned using [SETUP LOAD]
or [POWER ON SETUP], an asterisk (
*
) appears to right
of the menu name.
1. Press rotary knob <PICTURE> when no menu is dis-
played.
• The [PICTURE] (picture adjusting) menu appears.
• For details on how to operate menus, refer to “How to Use
the On Screen Menu” (→page20).
2. To close a menu, press <MENU>.
• This display disappears after approx. 10 seconds of inac-
tion. (The value shown before the display clears is con-
firmed.)
Audio volume display
MENUEXIT
[VOLUME] 30
1. Press <RETURN / VOLUME> when no menu is displayed.
• The audio volume bar meter appears.
• For details on how to use the audio volume, refer to“How to
Use the On Screen Menu” (→page20).
2. To close a menu, press <MENU> or the rotary knob
<PICTURE>.
• This display disappears after approx. 10 seconds of inac-
tion. (The value shown before the display clears is con-
firmed.)
Sharpness display
MENUEXIT
RETURN
RETURN
[SHARPNESS H] 14
• Indicates the [SHARPNESS H] and [SHARPNESS V] setting
of the [VIDEO CONFIG] menu.
• When no operation is performed for approx. 2 minutes, the set
value is confirmed and the display disappears.
FUNCTION display
MENUEXIT
RETURN
RETURN
[FUNCTION]
F1:WFM/VECTOR
F2:TWO WINDOW
F3:FOCUS-IN-RED
F4:TIME CODE
F5:LEVEL METER
WFM/VECTOR OFF
A
• Use the [FUNCTION] menu to set up functions.
• When [FUNCTION DISPLAY] (→page 35) is set to [ON1] or
[ON2], press any of the <FUNCTION1> to <FUNCTION5>
buttons to display the status of functions assigned to the
FUNCTION buttons.
• When no operation is performed for approx. 2 seconds, the
set value is confirmed and the display disappears.
• "A" indicates operating status.(→page37 “Functions displayed
during FUNCTION button operation”)