Filter
Top Products
50
51
3D Assist Mode (continued)
COMPARISON (Composition Check)
This function is for checking when the subject is captured with only the camera of one side.
MENUEXIT
RETURN
RETURN
[3D ASSIST]
COMPARISON
SBYS
Screen:
The L/R 2 screens are shown side-by-side or arranged vertically
and a 70 % size half-tone marker is shown inside each of the
images.
<Assist Point>
When there is only a left-eye or a right-eye image, discomfort
will be felt in 3D mode and make stereoscopic vision difficult.
Perform a comparison to check what part of the images are
outside the markers.
Underlined values indicate factory defaults.
Menu Setting Description
COMPARISON
SBYS
T&B
[SBYS] The SDI1 (L) image appears on the left side and the SDI2 (R) image
appears on the right side.
[
T&B
] The SDI1 (L) image appears at the top and the SDI2 (R) image appears
at the bottom.
CONVERGENCE (Convergence Check)
This function is for checking the subject’s position at a fixed screen position in order to determine the depth position of the main sub-
ject.
Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject’s position.
MENUEXIT
RETURN
RETURN
[3D ASSIST]
CONVERGENCE
MANUAL
MANUAL L
SPEED SLOW
Screen:
Normal display of one screen
<Assist Point>
• The place at which the image does not change is the conver-
gence point.
• When the camera adjustment (vertical or rotation direction
position adjustment) is correct, the image at other than the
convergence point will shift to the left/right target.
Underlined values indicate factory defaults.
Menu Setting Description
CONVERGENCE
MANUAL
AUTO
Selects how the images on SDI1 (L) side and the SDI2 (R) side are switched.
[MANUAL] Manual switching [AUTO] Automatic switching
MANUAL
L
R
Selects the image to display when [CONVERGENCE] is set to [MANUAL].
[L] SDI1 (L) side image [R] SDI2 (R) side image
SPEED
SLOW
FAST
Selects the speed when [CONVERGENCE] is set to [AUTO].
[SLOW] Every 1 second
[FAST] Every 4 frames (at 720P: Every 8 frames)