Filter
Top Products
26
Main Menu (continued)
27
MARKER types
16:9 marker
(Displayed for HD input and SD input in 16:9 ratio mode.)
The marker is only displayed as a vertical bar. In addition, the
section becomes the “MARKER BACK” item.
4:3 marker 13:9 marker
14:9 marker
VISTA marker, 2:1 marker, CNSCO marker
A horizontal dotted line is displayed as the marker.
VISTA marker 2:1 marker
CNSCO marker (2.35/2.39)
The vertical dotted lines are also displayed as the marker
when [UNDER] is selected under [SCAN] in the [VIDEO
CONFIG] menu.
VISTA marker 2:1 marker
CNSCO marker (2.35/2.39)
Area marker
This marker is displayed as a dotted line.
95 % area marker 93 % area marker
90 % area marker 88 % area marker
100 %
Area marker
80 %
Area marker
80 % area marker
USER Area marker
*
1
VAR Area marker
*
2
4:3 marker
(Displayed for SD input in 4:3 aspect ratio mode)
This marker is displayed as a dotted line.
95 % area marker 93 % area marker
90 % area marker 88 % area marker
80 % area marker
(Displayed for HD input and SD input in 16:9 ratio mode.)
This marker is displayed as a dotted line.
95 % area marker 93 % area marker
90 % area marker 88 % area marker
80 %
Area marker
100 %
Area marker
80 % area marker
USER Area marker
*
1
VAR Area marker
*
2
You can display the 4:3 marker and the 16:9 marker
simultaneously.
Simultaneous display example
The area becomes the “MARKER BACK”.
It controls the background of the marker selected with a 16:9
ratio.
4:3 marker
16:9 marker
16:9 marker: 95 % area marker
4:3 marker: 80 % area marker
Center marker
Center marker
This marker is displayed at the center
of the screen.
Cross marker
Cross marker
Use the rotary knob <PICTURE> to
move. (The cross marker is half the
length of the center marker and twice
the width)
TYPE1 Vertical 93.1%
Horizontal 93%
TYPE2 Vertical/Horizontal 93%
TYPE1 Vertical 89.5 %
Horizontal 88 %
TYPE2 Vertical/Horizontal 88 %
TYPE1 Vertical 89 % Horizontal 88 %
TYPE2 Vertical/Horizontal 88 %
*
1
Use the rotary knob <PICTURE> to set 80 to 100% in 1% increments.
*
2
Use the rotary knob <PICTURE> to set 80 to 100% in 1% increments separately for vertical and horizontal.