Panasonic BT-LH2170P Car Video System User Manual


 
22
23
User Data
This monitor can save up to five combinations of set values for MAIN MENU and screen adjustments made in the [PICTURE] (picture
adjusting) menu as user data that can be recalled.
You can also return set values and adjustments to their factory defaults.
User data include the following settings.
• Menu settings except [SETUP LOAD], [SETUP SAVE] and [REMOTE] in [CONTROL] (including button function settings on the
monitor front panel)
• Screen adjustments made with the rotary knob <PICTURE>
Saving user data
1.
Press <MENU> to display the main menu.
2. Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3. Turn the rotary knob <PICTURE> to select the [SETUP
SAVE] submenu and press the rotary knob <PICTURE>.
The set values in the submenu change to green.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER DOWN
POWER SAVE MODE
CALIBRATION
FULL
CENTER
3SEC OFF
FACTORY
USER1
LAST
EBU
OFF
OFF
Changes to green
4. Turn the rotary knob <PICTURE> to select settings to
save from the [USER1] to [USER5] and press the rotary
knob <PICTURE>.
The following screen appears.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SETUP SAVE]
USER1
YES
NO
5. Select [YES] and press the rotary knob <PICTURE>.
This saves the user data.
6. To return to the previous screen, press <RETURN/VOL-
UME>.
Loading user data
1.
Press <MENU> to display the main menu.
2. Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3. Turn the rotary knob <PICTURE> to select the [SETUP
LOAD] submenu and press the rotary knob <PICTURE>.
The set values in the submenu change to green.
MENUEXIT
RETURN
RETURNSEL. ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER DOWN
POWER SAVE MODE
CALIBRATION
FULL
CENTER
3SEC OFF
FACTORY
USER1
LAST
EBU
OFF
OFF
Changes to green
4. Turn the rotary knob <PICTURE> to select settings to call
from the [USER1] to [USER5] and press the rotary knob
<PICTURE>.
The following screen appears.
• To return to the factory defaults, select [FACTORY].
MENUEXIT
RETURN
RETURNSEL. ENTER
[SETUP LOAD]
USER1
YES
NO
5. Select [YES] and press the rotary knob <PICTURE>.
This loads the user data.
6. To return to the previous screen, press <RETURN/VOL-
UME>.