Panasonic BT-LH2170P Car Video System User Manual


 
72
73
Specifications
General
Power input
Power supply voltage Current consumption
AC : 100 V - 240 V, 50/60 Hz 0.55 A - 0.25 A
DC : 12 V (11 V - 17 V) 3.8 A
indicates safety information.
Dimensions (W x H x D): 510 mm×388 mm×198 mm ( 20-1/16 inches x 15-1/4 inches x 7-13/16 inches) (including stand)
510 mm×373 mm×72 mm ( 20-1/16 inches x 14-5/8 inches x 2-13/16 inches) (monitor only, not
including stand)
Mass: 7.0 kg (15.43 lb) (including stand)
6.1 kg (13.45 lb) (monitor only, not including stand)
Operating temperature: 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity: 20 % to 80 % (no condensation)
Storage temperature: - 20 °C to 60 °C (-4 °F to 140 °F)
Display panel
Dimensions: 54.6 cm (21.5 inchs) (effective screen area)
Aspect ratio: 16:9
Number of pixels: 1920 x 1080 (Full HD)
Display colors: Approx. 16,700,000 colors
View angle (contrast > 10:1): 178° left/right, 178° up/down
Input/output Connectors
VIDEO input: BNC x 1
SDI input: BNC x 2
SMPTE ST 424, 274, 296, 259, ITU-R BT.656-4 compliant
EMBEDDED AUDIO supported
3G-SDI: SMPTE ST 299 compliant
48 kHz, synchronous supported
16 channels supported
HD-SDI: SMPTE ST 299 compliant
48 kHz, synchronous compatible
8 channels supported
SD-SDI: SMPTE ST 272 compliant
48 kHz, synchronous compatible
4 channels supported
HDMI input: HDMI terminal x 1 (Type A terminal)
HDCP supported
EMBEDDED AUDIO supported
VIERA Link not supported
DVI-I input: DVI-I, 29-pin plug x 1
single link
HDCP supported
AUDIO input: Pin jack x 2 (stereo)
Input signal level: 0.31 Vrms
VIDEO output (through-out): BNC x 1
SDI output (active through-out): BNC×2
GPI: D-SUB, 9 pins x 1
RS-232C: D-SUB, 9 pins x 1
RS-485: RJ-45 x 2 (input, output)
Headphones: Stereo mini jack M3 x 1, 32 Ω, level adjustable
Other Input/output connectors
Speaker output: Monaural 0.5 W
Tally output (display): Red, green, amber
Weight and dimensions are approximate.
Inrush current, measured according to European standard EN 55103-1: 8 A