Sharp LED TV Car Satellite TV System User Manual


 
39
Active contrast
Automatically adjusts the contrast of an image according
to the scene. (“Advanced”, “Standard”, “Off”).
NOTE
“Active contrast” is not available in case of 4K input.
DNR (Digital Noise Reduction)
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
This function may not be available depending on the input signal
type.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
NOTE
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Audio settings
Go to “HOME” > “TV Menu” > “Setup” > “Audio”.
Setup
Bass
Adaptive Volume
Audio
Treble
[Off]
STANDARD
CH list
Menu
Balance
L30
R30
:Back:Enter
: Select
Audio
Adaptive Volume
Adjust volume level automatically to lessen sudden
volume change.
Item
On
Adjust the volume gaps.
Off
Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference with
the following settings.
Item
c (Cursor) d (Cursor)
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, press ?, press a/b to select
“Yes”, and then press ?.
Basic adjustment
LC90LE760X_EN_book.indb 39LC90LE760X_EN_book.indb 39 4/4/2014 3:10:06 PM4/4/2014 3:10:06 PM