52
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to “Home” > “TV Menu” > “Setup” > “Option”
> “Key lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote control
unit.
Button control
lock
Locks the buttons on the TV except the
power switch.
NOTE
• You cannot set both “RC control lock” and “Button control
lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel the
“RC control lock”. Press @ on the remote control
unit and set to “Off” to cancel the “Button control lock”.
NOTE
• See page 18 for the functions of the TV control panel buttons.
• To cancel “Button control lock”, use the remote control.
Bluetooth setup
Set this function when using the Bluetooth devices with
your TV.
It is possible to connect 3D glasses, a keyboard, mouse,
tablet and smartphone.
NOTE
• When you use the Bluetooth device with your TV for the first
time, you must make pairing between the device and the TV.
Once the pairing is correctly carried out, the Bluetooth device
will be registered on the TV.
Bluetooth devices
You can add, delete or select Bluetooth devices. If you
connect a tablet or smartphone to the TV by Bluetooth,
you can listen its sound through the TV.
E
Addition of a Bluetooth device
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Bluetooth setup” > “Pairing new
device”.
You can connect 3 kinds of Bluetooth devices listed below:
− Keyboard device
− Mouse device
− Audio input device
Connection / Selection Procedure
1 Press a/b to select the device you want to
connect.
2 Press c/d to select “Search”, and then press
?.
3 Model names of the detected devices will be
displayed.
4 Select the device with the message “New”, and
then press ?.
5 Wait the message indicating “Pairing completed”,
and then press ?.
Before connecting the devices, press the connect button
on the Bluetooth device you want to connect.
− Keyboard device: When pairing operation between
keyboard and TV is completed, enter the PIN code by
using the keyboard device.
− Mouse device: When pairing operation between mouse
and TV is completed, the name will be displayed, then
press ?.
− Audio input device:
1. Change input source to Bluetooth by pressing b on
the remote control unit.
2. In Bluetooth device (smartphone/tablet) enable Bluetooth
function. The device starts to search Bluetooth standby
TV.
3. TV name will be shown in Bluetooth device, then select
it.
NOTE
• See also the instruction manual supplied with the Bluetooth
device.
• You can register up to 6 devices to the TV, but only one
keyboard, mouse, audio output and audio input device can
be used at a time.
• If a device for which “Selected” is displayed does not operate
properly, try searching and selecting the device again.
• The keyboard or mouse may not operate properly depending
on the application being used.
• The Bluetooth device may not operate properly depending on
the device being used.
Useful viewing functions
LC90LE760X_EN_book.indb 52LC90LE760X_EN_book.indb 52 4/4/2014 3:10:08 PM4/4/2014 3:10:08 PM