Filter
Top Products
25
DSR Series
20.65 : EDIT ON
This command is used to set the DEVICE, which is running at the normal PLAY speed during
the EDIT PRESET mode, to the EDIT mode.
When receiving this command, the DEVICE will start executing after passing the edit delay
(three frames) time.
For the timing, refer to APPENDIX-1
44.00 : TIMER-1 PRESET
This command is used to preset the value, which has been given by the DATA-1 through
DATA-4, to the TIMER-1 (CTL COUNTER) of the DEVICE.
The (Drop Frame/Non Drop Frame) mode of TIMER-1 is set corresponding to BIT-6 of
DATA-1 as the following table.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
44.04 : TIME CODE PRESET
This command is used to preset the value, which has been given by the DATA-1 through
DATA-4, to the TIME CODE of the time code generator.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
The COLOR FRAMING (CF) and the DF/NDF mode of the TIME CODE GENERATOR are
set according to BIT-7 and BIT-6 of DATA-1.
For the timing, refer to APPENDIX-2.
4X
..
..
.05 : USER’S BIT PRESET
This command is used to preset the value, which has been given by the DATA-1 through
DATA-4, to the USER’s BIT of the time code generator and is used to preset the corresponding
bit inside the time data, that is given by DATA-5.
[DATA-5 (Binary Group Flag)]
For the timing, refer to APPENDIX-2.
DATA-1
DF
BIT6
0 OFF
1ON
DATA-1
CF
BIT7
0 OFF
1ON
DATA-1
DF
BIT6
0 OFF
1ON
0
0
00 0
BIT-59
(BG2)
BIT58
(BG1)
BIT43
(BG0)
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
0000 0
BIT-43
(BG2)
BIT-58
(BG1)
BIT-27
(BG0)
(NTSC)
(PAL)
DATA-1
2nd
BINARY
GROUP
3rd
BINARY
GROUP
6th
BINARY
GROUP
5th
BINARY
GROUP
8th
BINARY
GROUP
7th
BINARY
GROUP
1st
BINARY
GROUP
4th
BINARY
GROUP
DATA-2 DATA-3 DATA-4
MSD LSD MSD LSD MSD LSD MSD LSD