Filter
Top Products
46
DSR Series
72 3F 00 40 F1
CMD Normal mode x1.00 Checksum
73 3F 04 53 44 4D
CMD VAR REC/PLAY x4.00 Checksum
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
DA3 DA2 DA1DA4
1 : ANALOG AUDIO INPUT
0 : DIGITAL AUDIO INPUT
71.36 : TIMER MODE DATA
This return command is returned in response to the “60.36 : TIMER MODE SENSE” command
from the CONTROLLER. The DEVICE returns the value of setting in accordance with the
request.
[DATA-1]
00 : TIME CODE
01 : TIMER-1
02 : TIMER-2
60.3F : Δ t REC/PLAY PRESET SENSE
This command is used to request the Δ t REC/PLAY PRESET status of the DEVICE. When the
DEVICE receives this command, it returns the “73.3F : Δ t REC/PLAY PRESET DATA”
command.
73.3F : Δ t REC/PLAY PRESET DATA
This return command is returned in response to the “60.3F : Δ t REC/PLAY PRESET SENSE”
command. The DEVICE returns its own Δ t REC/PLAY PRESET status in accordance with the
request. For the data format, refer to “43.3F : Δ t REC/PLAY PRESET”.
Example) When DSR-85/85P is in the X4 mode :
In the case of DSR-80/80P/60/60P :
60.50 : DA INPUT SENSE
This command is used to request the audio input signal selection status of the DEVICE. When
the DEVICE receives this command, it returns the “71.50 : DA INPUT STATUS” command.
The DA INPUT STATUS with DATA-1 that shows the setting will be sent back.
71.50 : DA INPUT STATUS
This return command is returned in response to the “60.50 : DA INPUT SENSE” command
from the DEVICE. The DEVICE returns the data that the command is added to the audio input
status.
[DATA-1]