Filter
Top Products
29
DSR Series
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
VARIABLE
REC/PLAY
43.3F : Δ t REC/PLAY PRESET
This command is used to preset the Δ t REC/PLAY mode in accordance with the contents of
DATA.
This is used to switch X1 mode or X4 mode of DSR-85/85P.
When a device receives this command, it starts preparing Δ t REC/PLAY. When the preparation
is complete, it sets the status of Δ t REC/PLAY READY (7X.20 : STATUS DATA / DATA No.
A bit-3).
[DATA-1]
1 : ON 0 : OFF
[DATA-2, 3]
It specifies the speed during the Δ t REC/PLAY mode.
For the data format, refer to “2X.12 : VAR FWD”. DSR-85/85P enters X4 mode when
(DATA-2 > 40h), and enters X1 mode when (DATA-2 < 40h).
When a device receives the following command in the Δ t REC/PLAY PRESET mode, the DE-
VICE goes into the Δ t REC/PLAY mode and operates at the speed which is specified by the
command.
20.01: PLAY
20.02: REC
20.65: EDIT ON
24.34: SYNC PLAY
24.32: SYNC POINT PREROLL
40.40 : AUTO MODE OFF
40.41 : AUTO MODE ON
This command is used to switch ON/OFF the AUTO mode of the DEVICE.
When receiving this command, this command does not have influence on the operation of the
DEVICE.
40.44 : AUDIO SPLIT OFF
44.45 : AUDIO SPLIT ON
This command is used to switch ON/OFF the AUDIO SPLIT MODE of the DEVICE.
When receiving this command, this command does not have influence on the operation of the
DEVICE.
40.46 : VARIABLE MEMORY OFF
40.47 : VARIABLE MEMORY ON
This command is used to switch ON/OFF the VARIABLE MEMORY MODE of the DEVICE.