Filter
Top Products
58
DSR Series
VFL Format
[title_field] [CRLF]
[out_ch] [CRLF]
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
.
.
.
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
[out_ch] [CRLF]
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
.
.
.
[in_point] [SP] [out_point] [SP] [drive_id] [SP] [filename] [SP] [av_select] ( [SP] [OPTION] [SP] [OPTION] ...[OPTION] )[CRLF]
.
.
.
[EOF]
OPTION may be omitted → Downward compatibility with the current format is maintained.
Contents of OPTION :
–Video_**** (**** : hex number) Unity = 0x4000
–Chroma_**** (**** : hex number) Unity = 0x4000
–Hue_**** (**** : hex number) Unity = 0x0000 (2’s Compliment)
–Setup_**** (**** : hex number) Unity = 0x0000 (2’s Compliment)
–Audio_****** (**** : hex number) Unity = 0x100000
–Fade_* (* : 0 or V or X) Fade effect is applied to the end of specified area.
Limitations of VFL TEXT
Limitations of the VFL TEXT that can be used in the DSR-DR1000 are shown below.
. The supported formats of the timecode data are LTC and FTC. (Attribute.dat of each Clip is used to
identify LTC.)
. A clip cannot be created during recording (It cannot be opened).
. When out_ch is specified, only the video signal can be used. The other channels are not supported.
. MUTE and FREEZE are not supported as filename of the VFL text.
. VFL in VFL is not supported.
. Extended VFL is not supported.
. With regard to av_select, only [*] is supported.
. With regard to the Drive ID, only 0 is supported.
. Title_field is not used as Data. (Even when there is no title_field, however, the subscript CRLF is
required.)
. The minimum Duration that can be registered at 1 Event is 5 Frames.