Filter
Top Products
37
DSR Series
Request Command Response Command
IN DATA SENSE “74.10 : IN DATA”
OUT DATA SENSE “74.11 : OUT DATA”
A IN DATA SENSE “74.12 : A IN DATA”
A OUT DATA SENSE “74.13 : A OUT DATA”
78.14 : LTC INTERPOLATED TIME & UB DATA
The DEVICE is required the LTC TIME DATA and USER’s BIT DATA by the “61.0C :
CURRENT TIME SENSE” command and it interpolates with CTL or it is not read exactly, the
LTC TIME DATA will be added to the DATA-1 through DATA-4 and the LTC USER’s BIT
DATA will be added to the DATA-5 through DATA-8.
For the data format, refer to “24.31 : CUE UP WITH DATA” and “4X.05 : USER’S BIT
PRESET”.
74.16 : VITC HOLD TIME DATA
The DEVICE is required the VITC TIME DATA by the “61.0C : CURRENT TIME SENSE”
command and they had not been read, the VITC TIME DATA will be added to the DATA-1
through DATA-4.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
78.16 : VITC HOLD TIME & UB DATA
The DEVICE is required the VITC TIME DATA and the USER’S BIT DATA by the “61.0C :
CURRENT TIME SENSE” command and they had not been read, the VITC TIME DATA will
be added to the DATA-1 through DATA-4.
For the data format, refer to “24.31 : CUE UP WITH DATA” and “44.05 : U-BIT PRESET”.
70.0D : REQUEST TIME DATA MISSING
The DEVICE is required non-existent data by the “61.0C : CURRENT TIME SENSE” com-
mand, the DEVICE returns this command to the CONTROLLER.
60.10 : IN DATA SENSE
60.11 : OUT DATA SENSE
60.12 : A IN DATA SENSE
60.13 : A OUT DATA SENSE
These commands are used to request the IN/OUT DATA and the AUDIO IN/OUT DATA.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
74.10 : IN DATA
When the DEVICE receives the “60.10 : IN DATA SENSE” command, the IN point will be
added to the DATA-1 through DATA-4 of the “74.10 : IN DATA”.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
74.11 : OUT DATA
When the DEVICE receives the “60.11 : OUT DATA SENSE” command, the OUT point will
be added to the DATA-1 through DATA-4 of the “74.11 : OUT DATA”.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
74.12 : A IN DATA
When the DEVICE receives the “60.12 : A IN DATA SENSE” command, the AUDIO IN point
will be added to the DATA-1 through DATA-4 of the “74.12 : A IN DATA”.
For the data format, refer to “24.31 : CUE UP WITH DATA”.