Filter
Top Products
76
DSR Series
01.FB.E5 : EXTEND VIDEO INPUT SENSE
This command is used to inquire video input selection status.
Send back the “14.FB.E5 : EXTEND VIDEO INPUT STATUS” command to see the
setting in DATA-2 to DATA-4.
14.FB.E5 : EXTEND VIDEO INPUT STATUS
This command is used to send video input selection information in response to the
“01.FB.E5 : EXTEND VIDEO INPUT SENSE” command. This command sends back
input connector selection status in DATA-2, signal format in DATA-3, and HD/SD
information in DATA-4 as follows:
[DATA-2]
[DATA-3]
[DATA-4]
BIT-1 BIT-0 MODE
01 HD
10 SD
BIT-4
BIT-5
BIT-6
BIT-7
BIT-3 BIT-2 BIT-1 BIT-0
INTERNAL
SG
i.LINK SDI ANALOG
BIT-4
BIT-5
BIT-6
BIT-7
BIT-3 BIT-2 BIT-1 BIT-0
S (Y/C) Y/Pb/Pr
COMPOSITE