Filter
Top Products
26
DSR Series
40.08 : TIMER-1 RESET
This command is used to reset the TIMER-1 (COUNTER) to zero.
40.10 : IN ENTRY
40.11 : OUT ENTRY
40.12 : A IN ENTRY
40.13 : A OUT ENTRY
These commands are used to store the value of the TIMER or the TIME CODE data, which is
displayed on the DEVICE, into the IN, OUT, A IN or A OUT memory as an IN POINT, OUT
POINT, A IN POINT or A OUT POINT data.
44.14 : IN DATA PRESET
44.15 : OUT DATA PRESET
44.16 : A IN DATA PRESET
44.17 : A OUT DATA PRESET
These commands are used to preset the value, which has been given by the DATA-1 to DATA-
4, into the IN, OUT, A IN or A OUT memory.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
40.18 : IN SHIFT +
40.19 : IN SHIFT _
These commands are used to add or subtract the value of the TIME DATA, which has been
stored as an IN POINT, by one frame.
40.1A : OUT SHIFT +
40.1B : OUT SHIFT _
These commands are used to add or subtract the value of the TIME DATA, which has been
stored as an OUT POINT, by one frame.
40.1C : A IN SHIFT +
40.1D : A IN SHIFT _
These commands are used to add or subtract the value of the TIME DATA, which has been
stored as an AUDIO IN POINT, by one frame.
40.1E : A OUT SHIFT +
40.1F : A OUT SHIFT _
These commands are used to add or subtract the value of the TIME DATA, which has been
stored as an AUDIO OUT POINT, by one frame.
40.20 : IN RESET
40.21 : OUT RESET
40.22 : A IN RESET
40.23 : A OUT RESET
These commands are used to turn the IN, OUT, AUDIO IN or AUDIO OUT lamp to off.
40.24 : IN RECALL
40.25 : OUT RECALL
40.26 : A IN RECALL
40.27 : A OUT RECALL
These commands are used to turn the IN, OUT, AUDIO IN or AUDIO OUT lamp to on.