Filter
Top Products
31
DSR Series
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
ANALOGSDTIi.LINK
INTERNAL
SG
SDI
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
V/PB/PRG/R/B COMPOSITES (Y/C)
DATA-1 DATA-2 Input video source
01 01 ANALOG COMPOSITE
01 02 ANALOG COMPONENT (Y-R, B)
01 04 G/R/B
01 10 S (Y/C)
02 02 SDI
08 02 SDTI
10 02 i.LINK
80 XX Built-in signal generator
41.60 : VITC BYPASS
This command is used to select the VITC to be recorded in accordance with the contents of the
DATA-1.
[DATA-1]
00 : Records the data of the built-in TCG on the line that is specified in the menu or others.
01 : Records the input video signal as it is.
FF : Depends on the DEVICE.
42.61 : TCG MODE SELECT
This command is used to preset the internal TC generator according to the value of DATA-1 and
DATA-2.
[DATA-1]
00 : Time data can be set. Time data is always run.
01 : Time data can be set. Time data is run at recording.
02 : Regenerate the time code by using the playback LTC signal.
03 : The playback VITC signal is regenerated.
04 : Regenerate the time code by using the external LTC signal.
05 : The VITC signal that is read from the input video signal is regenerated.
FE: NO CHANGE
FF : Depends on the DEVICE.
42.70 : VIDEO INPUT SELECT
This command is used for selecting the input video source according to the value of DATA-1
and DATA-2.
[DATA-1]
[DATA-2]