Filter
Top Products
45
DSR Series
DATA No. BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
0 INSERT ASSEMBLE VIDEO A3 (TC) A2 (CUE) A1 (CUE)
1 DA4 DA3 DA2 DA1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
7X.30 : EDIT PRESET DATA
This return command is returned in response to the “6X.30 : EDIT PRESET SENSE” command
from the CONTROLLER. The DEVICE returns the data in accordance with the request.
For the data format, refer to “4X.30 : EDIT PRESET”.
EDIT PRESET STATUS
60.31 : PREROLL TIME SENSE
This command is used to request the PREROLL TIME setting status of the DEVICE.
When the DEVICE receives this command, it is sent back the “74.31 : PREROLL TIME
DATA” with DATA1 to DATA4 that shows the PREROLL TIME setting status.
74.31 : PREROLL TIME DATA
This return command is returned in response to the “60.31 : PREROLL TIME SENSE” com-
mand, from the CONTROLLER. The DEVICE returns the PREROLL TIME DATA in accor-
dance with the request.
For the data format, refer to “24.31 : CUE UP WITH DATA”.
60.32 : TAPE/AUTO SENSE
This command is used to request the TAPE/AUTO status of the DEVICE. When the DEVICE
receives this command, it returns the “71.32 : TAPE/AUTO STATUS DATA” command. The
TAPE/AUTO STATUS with DATA-1 that shows the setting will be sent back.
71.32 : TAPE/AUTO STATUS DATA
This return command is returned in response to the “60.32 : TAPE/AUTO SENSE” command from
the CONTROLLER. The DEVICE returns the value of setting in accordance with the request.
For the data format, refer to “41.32 : TAPE/AUTO SELECT”.
60.36 : TIMER MODE SENSE
This command is used to request the TIMER MODE or TIMER 1 or TIME CODE of the DEVICE.
When the DEVICE receives this command, it returns the “71.36 : TIMER MODE DATA” com-
mand. The TIMER MODE DATA with DATA-1 that shows the setting will be sent back.