Filter
Top Products
44
DSR Series
BIT-7 BIT-6 BIT-5 BIT-4 BIT-3 BIT-2 BIT-1 BIT-0
MSD LSD
60.2E : COMMAND SPEED SENSE
This command is used to request the TAPE SPEED command in which the DEVICE is operat-
ing. When the DEVICE receives this command, it returns the “71.2E : COMMAND SPEED
DATA” command.
71.2E : COMMAND SPEED DATA
This return command is returned in response to the “60.2E : CMD SPEED SENSE” command
from the CONTROLLER. The DEVICE returns its own tape speed data in accordance with the
request.
For the data format, refer to “2X.11 : JOG FWD”.
60.2F : VARIABLE MEMORY SPEED SENSE
This command is used to request the INITIAL SPEED DATA that is stored in the VARIABLE
MEMORY mode of the DEVICE.
When the DEVICE receives this command, it returns the “71.2F: VARIABLE MEMORY
SPEED DATA” command.
71.2F : VARIABLE MEMORY SPEED DATA
This return command is returned in response to the “60.2F: VARIABLE MEMORY SPEED
SENSE” command from the CONTROLLER. The DEVICE returns the command added to the
INITIAL SPEED DATA in accordance with the request.
For the data format, refer to “2X.11, 2X.12, 2X.13: JOG, VAR, SHUTTLE FWD” command.
6X.30 : EDIT PRESET SENSE
This command is used to request the EDIT PRESET status of the DEVICE, and the contents of
the “7X.30 : EDIT PRESET DATA” command to be sent back are assigned by DATA-1 added
to the command.
[DATA-1]
MSD (BIT 7~4) : These indicate the initial data No. of the “7X.30 : EDIT PRESET DATA”
command to be sent back.
LSD (BIT 3~0) : These indicate the number of bytes in the data to be sent back from the data in
the “7X.30 : EDIT PRESET DATA” command to be sent back.
When the “60.30” is received ; The DEVICE works same as “61.30.01” command.