Filter
Top Products
32
Step 3. Turn off (break) the Chime switch when the broadcast is completed. A post-announcement chime
tone will be sent out to the zone(s). (Only when the "ascending/descending 4-tone chime" has been
selected.)
Step 4. Press the selected zone selector key (Zone 1 – 5) again to terminate the broadcast.
12.2.4. Westminster chime
• It is possible to set the group of zones over which Westminster chime is sounded. (See p. 51 "Control
input/Telephone paging/Westminster chime-to-Group assignment.")
• A chime tone is remotely sent out to the set zone group by activating the unit's rear panel-mounted
CONTROL I/O connector pin No. 11 "Westminster chime activation." (See p. 45 "CONTROL I/O
CONNECTOR FUNCTIONS.")
VM amplifier
Chime activation
GND
Chime activation switch
Pin No. 9
Make
Break
Post-announcement
chime tone