Filter
Top Products
50
Connected unit No. table (SW3)
* The total number of one Sub-VM amplifier and up to 4
Remote Microphones (excluding the Master amplifier
and Remote Microphone Extension)
SW4 switch setting (Both switches are factory-preset to ON position.)
* Determines the attenuation level when the broadcast of higher priority (level 2 or 3) overrides the BGM
broadcast (priority level 4). (See p.27 "GENERAL-PURPOSE BROADCAST PRIORITY)
23.3. Remote Microphone's Function Switches
* One of 2 priorities can be set for each Remote microphone. (See p.27 "GENERAL-PURPOSE
BROADCAST PRIORITY.")
RM (RM-200M) Unit No. table
All switches No. 1 – 6 are factory-preset to the ON position.
Switch No.
No. of Connected Units*
6 7 8
OFF OFF OFF 0
ON OFF OFF 1
OFF ON OFF 2
ON ON OFF 3
OFF OFF ON 4
ON OFF ON 5
Switch No.
BGM broadcast volume attenuation*
1 2
OFF
OFF
No attenuation
ON
–28 dB (just audible)
ON Don't care –∞ dB (inaudible)
6
Compressor
On
Off
12
ON
3456
Function setting switch (No.23)
Note
The switch is actually installed upside down.
Switch No.
Function
ON
OFF
12
RM Unit No.
(See the RM Unit No.
table below.)
3
Broadcast
Priority*
2
1
4
Talk key
operation
Press-to-talk
type
Talk lock type
5
Emergency
switch
Enable
Disable
RM Unit No.
No. 1
No. 2
No. 3
No. 4
Switch No.
12
ON ON
OFF ON
ON OFF
OFF OFF