7 CentreWare Internet Services
206
Services Network
Scanning
(continued)
Advanced
Template Pool Setup
Allows you to view and modify the remote pool setups.
Remote Template Repository:
• Protocol – Select a transfer protocol from [FTP],
[Netware], [SMB], [HTTP], and [HTTPS].
• Host Name/IP Address & Port – Enter the host
name/IP address and post number of the transfer
protocol. This appears only when [FTP], [SMB],
[HTTP], or [HTTPS] is selected in [Protocol].
• Validate Repository SSL Certificate - Place a check
mark into this check box to validate the repository
SSL certificate. This appears only when [HTTPS] is
selected in [Protocol].
• Share – Enter the shared name. This appears only
when [SMB] is selected in [Protocol].
• Scriptpath and filename (from HTTP root) - Specify
the script path and file name. This appears only
when [HTTP] or [HTTPS] is selected in [Protocol].
• Document Path – Specify the path to the file
repository using up to 128 characters.
• Server Name - Specify the server name. This
appears only when [Netware] is selected.
• Server Volume - Specify the server volume. This
appears only when [Netware] is selected.
• NDS Context - Specify the NDS context. This
appears only when [Netware] is selected.
• NDS Tree - Specify the NDS tree. This appears only
when [Netware] is selected.
• Login Credentials to Access the Destination – Select
[System] to specify the login name and password on
this page. Select [Prompt at User Interface] to
specify the user ID and password on the machine’s
control panel when requesting a job. Select [None]
to disable authentication. [None] appears only when
[HTTP] or [HTTPS] is selected.
• Login Name – Specify the login name to use.
• Password – Specify the password for the login
name.
• Retype Password – Re-enter the password for
verification.
Scan to Home Allows you to configure the Scan to Home feature. This
feature is available only when remote authentication is
enabled.
General
Status – Select whether to enable or disable the Scan
to Home feature.
Friendly Name – Give a name to the home directory
where Scan to Home jobs will be sent. The name can
be up to 127 characters long.
Determine Home Directory – Specify the method of
determining the home directory. [LDAP Query]
searches the home directory via LDAP. [No LDAP
Query] determines the home directory using the
machine’s resource settings.
Network Home Path – Set the home directory in UNC
format with up to 128 characters. This item is displayed
when [Determine Home Directory] is set to [No LDAP
Query].
Feature Setting items
