15 Problem Solving
392
016-746 Received a PDF file containing unsupported functions. Use a print driver to print
the file.
016-747 An error occurred while annotation image data was being processed due to
insufficient memory. Take one of the following actions:
• Increase the annotation image size.
• Reduce the number of the images in [Page Layout] > [Repeat Image].
• Contact the Xerox Welcome Center if the problem persists.
016-748 Unable to print due to insufficient hard disk space. Reduce the number of pages
in print data, for instance by dividing the print data, or by printing one copy at a
time when making multiple copies.
016-749 The printer language received from a print driver is not supported on the
machine. Use the machine’s print driver. If the problem persists, contact the
Xerox Welcome Center.
Or, the printer language received for the Internet Fax job is not supported on the
machine. Request the sender to send the document with a printer language
supported by the machine.
016-750 Printing banner sheets was cancelled. Enter the System Administration mode
on the touch screen. Press the <Machine Status> button, and select the [Tools]
tab on the [Machine Status] screen. From [System Settings] > [Print Service
Settings] > [Other Settings], select [Banner Sheet] and set [Start Sheet], and
also select [Banner Sheet Tray] and set [Tray 1].
016-751 An error occurred due to insufficient memory, when the PDF Direct Print mode is
set to PostScript. Use the machine print driver, or increase the PostScript
memory.
016-752 An error occurred due to insufficient memory. Change the print mode to a higher
speed mode. If the problem persists, add memory.
016-753 The entered password is invalid for the PDF file. Set the correct password on
ContentsBridge.
016-755 A print error occurred. The PDF file is print protected. Use Adobe Reader to
cancel the print protection.
016-756 The use of the service is restricted.
016-757 A wrong password was entered. Enter the correct password.
016-758 The account is not authorized for copying.
016-759 The maximum number of copies has been reached.
016-760 An error occurred during PostScript processing. Take one of the following
actions.
• Change to the high speed print mode on the print driver.
• Increase PostScript memory.
016-761 An image output error occurred. Change to the high speed print mode on the
print driver.
016-762 The specified print language is not supported on the machine. Specify the print
language in [Print Mode] under [Port Settings].
016-763 The POP server was not found. Check if the address of the POP server is
correctly set on the machine. Also check the network cable connection.
016-764 Unable to connect to the SMTP server.
016-765 Unable to send e-mail due to insufficient hard disk space on the SMTP server.
Code Description and Remedy
