Fault Codes
417
047-217 A communication error occurred between the main unit and the High Capacity
Feeder. Switch off the machine, and then switch it on again. Contact the Xerox
Welcome Center if the problem persists.
047-218 A communication error occurred between the main unit and a tray module.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
062-210 The document feeder malfunctioned. Contact the Xerox Welcome Center.
062-211 An error occurred in the document feeder. Contact the Xerox Welcome Center.
062-277 A communication error occurred between the scanner and the feeder. Contact
the Xerox Welcome Center.
062-394 Data could not be written in memory space. Switch off the machine, and then
switch it on again.
062-790 The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter in the User Guide, to verify the types of documents
that can be copied.
071-210
071-211
An error occurred when Tray 1 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
072-210
072-211
An error occurred when Tray 2 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
073-210
073-211
An error occurred when Tray 3 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
074-210
074-211
An error occurred when Tray 4 was used. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
077-211 An error occurred with the Tray Module. Switch off the machine, and then switch
it on again. Contact the Xerox Welcome Center if the problem persists.
077-215 An error occurred when the Two Tray Module was used. Switch off the machine,
and then switch it on again. Contact the Xerox Welcome Center if the problem
persists.
078-210 An error occurred when Tray 1 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
078-211 An error occurred when Tray 2 of the High Capacity Tandem Tray was used.
Switch off the machine, and then switch it on again. Contact the Xerox Welcome
Center if the problem persists.
078-212 An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
078-213
078-214
Tray 5 (Bypass) malfunctioned. Switch off the machine, and then switch it on
again. If the problem persists, contact the Xerox Welcome Center.
078-250 An error occurred in the High Capacity Feeder. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
081-799 The e-mail to fax job was cancelled. The fax destination may be incorrect.
Check the number, and try again.
112-700 The hole punch waste container is full. Empty the container.
For information on how to empty the hole punch waste container, refer to
Emptying the Hole Punch Waste Container (Optional) on page 37
.
Code Description and Remedy
