Fault Codes
391
016-726 The printer language was not selected automatically. The probable causes are
as follows:
• PostScript data was sent to the machine, but the PostScript Kit was not
installed on the machine.
• PDF data was sent directly to the machine using the lpr command, but the
HDD was defective. Contact the Xerox Welcome Center.
• PCL data was sent to the machine, but the optional emulation kit was not
installed on the machine.
016-727 The Print to Mailbox job was cancelled, because there was no data for the job.
Check if the document is blank.
016-728 The TIFF file contains unsupported tags. Check the print data.
016-729 The TIFF file could not be printed, because the resolution of the TIFF file was
too high. Lower the resolution of the TIFF file, and try again.
016-731 The print job was interrupted. Try printing the data again.
016-732 The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
016-733 The IP address after the @ character could not be obtained. Enter the e-mail
address correctly.
Or, the DNS Internet address after the @ character could not be resolved. Set
the DNS server address correctly.
016-734 Printing a simple transmission report failed. Set the [E-mail Receive Protocol] on
the sender’s end to [SMTP].
016-735 An attempt was made to print a job template while it was being updated. Wait a
while, and then try printing the template again.
016-736 A lock directory was not created.
• Check that there is space on the target disk.
• Check the access permissions.
• Delete any existing lock directory.
016-737 The lock directory was not deleted. Delete the lock directory.
016-738 The Booklet Creation feature does not support the paper size specified. Select a
paper size supported by the Booklet Creation feature.
016-739 The specified paper size is not appropriate. Make sure that the combination of
the document and paper sizes is feasible for the Booklet Creation feature.
016-740 The Booklet Creation feature does not support the paper tray specified. Select a
paper tray supported by the Booklet Creation feature.
016-741 Unable to move onto the downloading mode.
016-742 The product ID in the downloaded data is invalid. Try downloading again.
016-743 The downloaded files are not supported. Download files available for the model
of your machine.
016-744 An error occurred to the data being downloaded. Check if the connection
between the external device and the machine is secured, and try executing the
operation again.
016-745 An XPJL error occurred while downloading. Try executing the job again. Contact
the Xerox Welcome Center if the problem persists.
Code Description and Remedy
