15 Problem Solving
412
033-735 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-736 The transmission was cancelled, because the data size exceeded its upper limit.
033-737 A fax error occurred. Perform the same operation again.
033-738 Abnormal JBIG image data was received. No user action is required.
033-740 The print job for the received fax document was cancelled. No user action is
required.
033-741
033-742
A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
033-743
033-744
033-745
033-746
A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-747 The job was suspended. No user action is required.
033-749 The machine rectified a memory problem automatically for printout. No user
action is required.
033-750 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
033-751 Outputting an activity report was suspended, because the machine was in Sleep
mode. After the machine exits the Sleep mode, the machine will output the
report.
033-755 Unable to print the fax document due to a malfunction of the fax service. Take
one of the following actions:
• Switch off the machine, and then switch it on again.
• Make sure that the Fax Card is connected to the machine.
• Print an error history report to clear problems.
Contact the Xerox Welcome Center if the problem persists.
034-211
034-212
An error occurred in the fax controller. Contact the Xerox Welcome Center.
034-500 An incorrect telephone/fax number was dialed. Check the number, then perform
the same operation again.
034-501 The telephone cable may not be connected securely. Check the cable
connection, and resend the document. Refer to Machine Components in the
Product Overview chapter of the User Guide.
034-505 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
034-506 The remote copy function (to make multiple copies of a received document) may
not be supported on the destination machine. Check if the destination machine
supports the remote copy function.
034-507 Communication failed, because the specified password was not correct. Make
sure that the password and telephone number are correct. The destination
machine may be set not to release its ID number.
This error code is also displayed when a polling request is rejected.
034-508
034-509
034-510
A fax error occurred. If sending a fax, check the fax settings, fax number, and
other settings, then perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
Code Description and Remedy
