A SERVICE OF

logo

15 Problem Solving
414
034-734 An internal error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
034-796 The fax number is invalid. Check the number, and try again.
034-797 A communication parameter error occurred. Switch off the machine, and then
switch it on again. Contact the Xerox Welcome Center if the problem persists.
034-798 A parameter error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
034-799 A fax error occurred. Switch off the machine, and then switch it on again.
Contact the Xerox Welcome Center if the problem persists.
035-550 An error occurred during data write processing. Contact the Xerox Welcome
Center.
035-700 A fax error occurred. Perform the same operation again. Contact the Xerox
Welcome Center if the problem persists.
035-701 Unable to communicate due to an incorrect phone number. Check the phone
number, and perform the same operation again.
If DP (Dial Pulse) is used for G3, check that "" and "#" are not included in the
phone number.
035-702
035-703
The other party cancelled the transmission. Ask the other party to check their
machine status, and resend the document if necessary.
035-704 The specified feature (such as polling) is not supported by the remote machine.
Contact the other party to check the supported functions.
035-705
035-706
The destination machine may have a problem. Check the destination machine,
and try again.
035-707 No password or an invalid password was specified for the fax data. This code is
only to notify that the machine received such a document.
035-708
035-709
035-710
035-712
035-713
The destination machine may have a problem. Check the destination machine,
and try again.
035-714 Refer to 035-702.
035-715 Refer to 035-507.
035-716
035-717
035-718
035-719
A communication error occurred. Ask the sender to try again.
035-720 The destination machine could not receive the document you sent.
Check if:
the destination machine has paper in paper trays.
the destination machine has no paper jam.
the destination machine has enough memory.
the destination machine supports G3 reception.
When using remote broadcasting, check if the machine supports the feature.
When sending data directly to a remote mailbox, check if the passcode is
correct.
035-721
035-722
A communication error occurred. Ask the sender to try again.
Code Description and Remedy