Fault Codes
397
018-568 SSL access to the HTTP server failed. Check if your computer is connected to
the HTTP server. Also check if the SSL is enabled, and if the HTTP server name
and path are correctly set.
018-569 The HTTP server certificate may have a problem. Check if your computer is
connected to the HTTP server. Also check if the SSL server certificate for the
HTTP server is registered on the machine and if the certificate is valid. If the
SSL certificate is not registered on the HTTP server, disable the [Verify Remote
Server Certificate] setting.
018-570 A client certificate authentication error occurred on the HTTP server. Check if
your computer is connected to the HTTP server. Also check if the SSL client
certificate is registered on the machine, and if the device certificate is registered
on the HTTP server.
018-571 An internal error occurred. Try again. Contact the Xerox Welcome Center if the
problem persists.
018-572 The specified Netware context name may contain invalid characters. Check the
context name.
018-573 The specified Netware server or tree name may contain invalid characters.
Check the server name and the tree name.
018-574 The specified Netware volume name may contain invalid characters. Check the
volume name.
018-575 The specified Netware user name or password may contain invalid characters.
Check the user name and password.
018-576 The specified Netware path may contain invalid characters. Check the path
name.
018-577 The specified file name may contain invalid characters. Check the file name.
018-578 The specified server or tree name does not exist. Check the network cable
connection on the machine. Also check if your computer is connected to the
Netware server, and if the server and tree names are correct. If the error
persists, run DSREPAIR at the server console on the Netware server.
018-579 The hard disk on the Netware server may be full. Check if your computer is
connected to the Netware server, and check the free space of the server. If the
problem persists, run DSREPAIR at the server console on the Netware server.
018-580 The specified volume name does not exist on the Netware server. Check if your
computer is connected to the Netware server, and if the volume name is correct.
If the problem persists, run DSREPAIR at the server console on the Netware
server.
018-581 The specified folder path does not exist on the Netware server. Check if your
computer is connected to the Netware server, and if the folder path is correct. If
the problem persists, run DSREPAIR at the server console on the Netware
server.
018-582 Access to the Netware server was denied. Check if your computer is connected
to the Netware server, and if you are authorized to access and work with the
Netware server. If the problem persists, run DSREPAIR at the server console on
the Netware server.
018-583 A hard disk error occurred on the Netware server. Check the status of the HDD
on the Netware server. Also check if your computer is connected to the Netware
server. If the problem persists, run DSREPAIR at the server console on the
Netware server.
Code Description and Remedy
