Fault Codes
415
035-723
035-724
A communication error occurred.
Fax transmission: Check the fax number. Check if the specified features are
supported on the destination machine.
Fax reception: Ask the sender to try again.
035-725 Refer to 034-511.
035-726 A communication error occurred.
Fax transmission: Check the fax number. Check if the specified features are
supported on the destination machine.
Fax reception: Ask the sender to try again.
035-727
035-728
035-729
A communication error occurred. Ask the sender to try again.
035-730
035-731
035-732
035-733
035-734
035-735
035-736
035-737
035-738
035-739
035-740
035-741
035-742
A communication error occurred.
Fax transmission: Check the fax number. Check if the specified features are
supported on the destination machine.
Fax reception: Ask the sender to try again.
035-743
035-744
035-745
Communication failed. The fax number is not correct, or the specified features
are not supported on the destination machine. Enter the correct fax number, and
check the features supported on the destination machine.
035-746 The fax network did not respond. Check the following, and send the document
again.
• Is the telephone line correctly connected to the machine?
• The other party may not be connected to the fax network, or there may be
some problem with the network.
When you are connected to a fax network that requires an access code, enter
two pauses after the access code, and then dial the fax number.
035-747
035-748
Transmission was stopped, because the <Stop> button was pressed while the
machine was dialing or sending data. No user action is required.
035-749 The machine dialed the fax number the specified number of time, but the
destination machine did not answer. Check the telephone line connection to the
destination machine.
035-750 Transmission was cancelled, because the machine was switched off or the
<RESET> button was pressed while the machine was dialing or sending data.
Switch the machine on again and resend the document. Contact the Xerox
Welcome Center if the problem persists.
035-751
035-752
Transmission was cancelled, because the <Stop> button was pressed while the
machine was dialing or sending data. No user action is required.
035-762 Refer to 034-508.
Code Description and Remedy
