8 Printer Environment Settings
262
IPP (Internet Printing Protocol)
This section explains how to set up the machine to operate in an IPP (Internet Printing
Protocol) environment. The following information is provided:
Information Checklist – page 262
IPP Environment – page 262
IPP Installation – page 263
Installation Procedure – page 263
Network Communication Setup – page 263
Computer Setup – page 265
Test Print – page 265
Information Checklist
Before starting the IPP installation procedures, make sure that the following items are
available or have been performed.
If problems are encountered during the installation of the machine, refer to
Problem
Solving on page 341
.
IPP Environment
System configuration
The machine supports Internet Printing Protocol (IPP). As Windows 2000/Windows XP/
Windows Server 2003/Windows Me/Windows Vista are installed with the client
software needed to output to an IPP printer, you can specify this printer using the Add
Printer Wizard. Using IPP, you can print to a remote printer through the Internet or
intranet.
The transport protocol for IPP can be TCP/IP.
Item By
An existing operational TCP/IP network is required. These procedures
are not designed to install a network.
Customer
Obtain and record the following information:
• IP address
• Gateway address
• Subnet mask (for IPv4) / Prefix (for IPv6)
•Host name
Customer
Test the machine to make sure that it is fully installed and functioning
correctly.
Customer
Install the print driver. Customer
