Filter
Top Products
11
982A Low-Level Isolator
Small in-line, low-level device that eliminates ground loops inherent in car audio displays. One
required per amplifier group (982A is not recommended with subwoofer groups).
983 Four-Channel
AutoMatch
Module
Device used to protect high-level in/out products on display that have different ground schemes.
Device will protect products from harm when a floating ground source is selected to play with an
amplifier. If needed, only one unit is required per display when demonstrating high-level head units
in combination with power amps.
985EZ A/V Distribution Amplifier
Distributes component video signal to up to 8 video monitors.
987 EVC Audio Level Module
Adds 4 channels of Equal Volume Comparison and SPL AutoLimiting to the 902 Control Panel (one
987 is shipped with each 902).
990 External Infrared Receiver
Ceiling mount, omnidirectional IR Receiver used to extend the 905 Remote Transmitter’s range for
greater line-of-sight distances with the 902 or 903.
993 Amp Sharing Adapter
Allows easy hookup for one amplifier to be selected for any of three positions (e.g., Front, Rear or
Sub).
DC Distribution Modules
915X DC Power Adapter
DC expander Module that provides connections to DC power source for 4 Equalizers, Crossovers, or
CD Changers. Includes resettable 10 amp circuit breaker. Use with Model 922 or Model 958.
916X DC Power Adapter
DC expander Module that provides connections to DC power source for 4 car audio amplifiers. Uses
resettable 10 amp circuit breaker for ignition circuit and 40 amp resettable circuit breaker for circuit
from battery terminals. Use with Model 942. The 916X also provides the DC connection points for
980EZ, 910D and 915X modules.